|
Click on a month below to find out which jobs you should be doing
each month of the year
January
| February | March |
April | May |
June | July |
August
September |
October | November
| December
January
-
Remove fallen leaves
-
Don’t walk on frozen turf
-
Have the mower overhauled and to make sure that the other lawn tools are
ready for use in the spring
-
Laying turf is possible during fine spells
February
-
In
mild districts worm casts may appear, brush them away when dry
-
Do
not be tempted to mow your lawn before March
-
Finish turfing this month
-
Begin soil preparation at the end of the month if you plan to sow seed
March
-
As
soon as the grass starts to grow and the weather is fine, rake the lawn to
remove leaves and surface rubbish. Do not rake too vigorously at this stage
or you will damage the grass.
-
If
there have been heavy frosts during the winter, settle the turf by light
rolling
-
Choose a dry day for the first cut and merely remove the top of the grass
-
Two
cuts are sufficient this month
-
Apply a moss killer if necessary
-
Neaten lawn edges with a half-moon edging iron
-
Repair broken edges
April
-
Feeding and weeding can begin towards the end of the month, provided that
the grass and weeds are actively growing
-
Mow
often enough to stop the grass growing away, but do not cut too low
-
Dig
out patches of coarse grass - fill the holes with sifted soil and then
re-seed or re-turf
May
-
Continue mowing, increase the frequency as necessary and lower the height of
cut
-
You
should be mowing once a week
-
This is the best month for weed killing
-
Water if the month is particularly dry and before obvious signs of distress
June
-
Mow
twice a week when the soil is moist. If there is a long dry spell, raise the
height of the cut and do not use the grass box.
-
This is the time for summer feeding and weeding
-
Trim the edges regularly
-
Be
prepared to water if there is a dry spell
July
August
-
The
same general treatment as for July
-
August is the last month of the year for weed killing and for feeding with a
nitrogen-rich fertilizer
-
Seed sowing can begin in late August
September
-
Increasing the interval between mowings and the raise the height of cut
-
Worms may become active at this time of year
-
Scarify, then spike any compacted areas and finally top dress
-
Treat diseased patches
-
Tackle moles this month
-
Sowing seed
October
-
Carry out the last cut or two, raising the cutter height.
-
Trim lawn edges
-
Apply Autumn Feed
-
Carry out lawn repairs
-
Complete the scarify-spike-top dress routine
-
Brush up fallen leaves
-
Dig
out tufts of coarse grass, then re-turf or re-seed the bare patches
-
Lay
turf
November
-
Carry out final cut if the if the weather isn’t frosty or wet
-
All
equipment should now be cleaned and oiled for winter storage
-
Keep the lawn clear of fallen leaves and other debris
December
|